HOW TO ROOT GIONEE PIONEER P2

.

Rooting process
REQUIREMENTS
1-working brain(if you can count 1-10 it means you have it)

2-a working internet connection (on pc or your p2
3-a computer(laptop or desktop)
4-Rooting tool plus drivers.
links
1usb drivers: http://pdanet.co/bin/PdaNetA4126.exe
2Motochopper(root tool): http://vulnfactory.org/public/motochopper.zip

root steps
*enable usb debugging in developer mode*
1. Install the usb drivers to your computer, during the installation when you get to
this stage

Select OTHERS and connect your phone to the computer then click next till installation is completed

2.extract the content of motochopper.zip to disktop and execute the run.bat file the file will guide you through the rest.
Credits to poster @http://forum.xda-developers.com/showthread.php?t=2399708

tested by directonpc on gionee p2

HOW TO CREATE CUSTOM RINGTONE ON UR IPHONE

So you bought an iPhone. You love the phone and all its features, but wish you didn't have to pay for your songs twice to get a ringtone. There are plenty of songs in your music library, but no way to make ringtones from any of them. Or is there? Actually, with a little bit of trickery (nothing illegal), you can create ringtones from any one of your non-DRM songs in your iTunes library easily and for free. This works on both Mac and Windows PCs.

*Please note: There may be differences among all the possible combinations of iTunes versions and operating system versions (see Tips for a way to work around the syncing issues).

 

•  
•  

Difficulty: Moderately Easy

Instructions

Things You'll Need:

• iTunes
• Mac or Windows computer
• Non-DRM song (i.e., one not bought from the iTunes Store)

1. 1
   Open iTunes.
   
2. 2
   Find the song that you want to make into a ringtone.
   
3. 3
   Listen to the song and find the part of it you want to use. The chorus may be a good place to start.
   
4. 4
   Write down the start and stop times of the clip.
   
5. 5
   Right-click the song and select "Get Info."
   
6. 6
   Click the "Options" tab.
   
7. 7
   Type in the start time of your ringtone in the text box next to "Start Time" in the minutes:seconds (i.e., 2:01) format.
   
8. 8
   Type in the end time of your ringtone in the text box next to "Stop Time." Make sure the ringtone is no more than 40 seconds long.
   
9. 9
   Click "OK."
   
10. 10
    Right-click your song again and select "Convert Selection to AAC." Wait for iTunes to convert your song. It will create a duplicate version.
    
11. 11
    Right-click the ringtone and select "Delete."
    
12. 12
    Click on the "Keep Files" button.
    
13. 13
    Find the file. It's usually in your User folder under "Music > iTunes > iTunes Music" and under the band's name. It will have an extension of m4a.
    
14. 14
    Replace the m4a extension of your ringtone with m4r. You can either double-click slowly to rename your file, or right-click and select "Get Info" on a Mac or "Rename" on a Windows PC.
    
15. 15
    Click "Use .m4r" or the PC equivalent when the system warns you that the change may affect the use of your file.
    
16. 16
    Double-click the ringtone file. ITunes will automatically add it to your ringtones folder in your iTunes Music Library.
    
17. 17
    Connect your iPhone and sync your ringtones.

HOW TO CREATE CUSTOM THEME VIA PC SUITE

How to Use PC Suite Customize your iPhone Theme

tags: iPhone Discussion How to Use PC Suite Customize your iPhone Theme

PC Suite could easily install beatiful themes on your  iPhone & iPod touch by install Winterboard , however, guys will find it's not the same as before  these days, after you cilick "themes"




You will see a popup in Chinese to let you install themes, after click "Install" button, and your iPhone will be installed Pandhome for iPhone, then you can install and change theme normally in PC Suite, but if you find you can't install Pandahome for iPhone normally,  you need this Temporary Guide.

Step 1

Download the theme you want from Download center

Step 2

After Download a theme (with Zip file), unzip it to get an theme file 

Step 3

Drag the theme file to "/Library/Themes" on Your iPhone via "Files" function in your PC Suite



Step 4

Go to your iPhone Setting  find Winterboard at the botton, select the theme you want.






Old Guide is Here

Updated: winterboard (support iOS4) Download is Here

After you jailbreak your phone, you will want to explore all the new things it can do. Using PC Suite and  Winterboard is one of my favorite things about my jailbroken iPhone. Its great to be able to customize the look and feel of my phone. With winterboard you can change backrounds, icons, sounds, lock screens, and much more. Follow these easy steps to use winterboard on your phone.
Step1
To use winterboard you phone must be jailbroken. Here is  a link at the bottom to walk you through jailbreaking your iPhone if you do not already have this done.
Jailbreak & Unlock iPhone 3G/3GS 3.1.2

Step2: install winterboard

Connect PC Suite and open theme in Media (like the following pic)

and if you did not install the winterboard before the pc suite will automaticly turn the interface into "Apps" in PC Suite(as pic)

and pc suite will automaticly install the winterboad for you, all you need to do is 'click install'
Second  Solution:
Download the winterboard (support iOS4) here install it via pc suite.

Step3

After installation you can start to customize your iPhone theme you want, you can download the theme from the Download centre theme catalog get the theme what you want. Unzip the theme zip and remember where the theme files are.

Step4
when you get the iphone themes you want, let's decorate your iphone, make it different and be your own style

Open Media's theme in PC suite



and we will get this "Web Themes"interface, for some reason, the Chinese still stand there.


If these Chinese bother you a lot, We just skip it, let's move to "iPhone Themes"


Click "Add Theme"



Then Confirm the theme, the pc suite will install the into your iphone



At last choose the theme installed "Set as theme"



Notice: Sometime After you Click "Set as theme" and the iphone did not change anything, Don't  worry about it, you just can choose the theme you installed in the Winterboard on your iPhone, and press "Home" botton, Done
     

HOW TO INSTALL APPS FROM OUTSIDE ITUNESS

Some of you may meet some big ipa files installed by PC Suite crashed, or just can not open, and unfortunately there is no good solution to fix it right now, So we trun to iTunes, actually iTunes can  install some big cracked ipa file on your iPhone or iPod Touch normally, Following is the step-by-step tutorial(Maybe most of you have read some tutorial like this, but I believe some new iPhone users in Pandaapp forum may need this!)

First of all Jailbreak your iPhone or iPod Touch
According your idevice model and iOS running to choose Jailbreak tool in Here
Boom!!! Unthethered Evasi0n Jailbreak for iOS 6.X Has Been Released!

When you done the jailbreak work, Here we go Now:

Step1: (Must Known)We need install an Patch (from Cydia) to install cracked ipa files via iTunes

Step2: If your iPhone still running iOS 2.X, you can search and install "MobileInstallationPatch" If Not goes to Step 3

Step 3: Open Cydia > Manage > Sources > Edit > Add

http://cydia.hackulo.us
or
http://www.sinfuliphonerepo.com


and then search and install  the following patches according to the iOS your iPhone running

"Appsync for OS 3.0"

"Appsync for OS 3.1"

"Appsync for OS 3.2"

"Appsync for OS 4.0"

"Appsync for OS 4.1"

"Appsync for OS 4.2"(New)


"Appsync for OS 5.0+"(New) Works for iOS 6.X too



This is simple and painless. Double click on the .ipa file and sync your device. Thats it. But just in case you want to know more , this is what is happening. By double clicking the .ipa file, you will open the file with iTunes. The file will be automatically copied into iTunes library. Once iTunes is loaded and the files was opened , you just need to press sync, and the instalaltion begins.

  

How to root tecno L3

First and formost ........it has been a great Battle so far.
that some of us even gave up on L3 due to Rooting prob.

Now Credits to those who made things happen on L3
Datz one thing i dont lack in my "made easy Tutorials" giving credits to those who deserve it

Credits to XDA-Devs for this 
Credits to herrlekan of Nairaland for source linking and being the first to ROOT this Baby..hehe
Credits to Nekedchris of Nairaland for sharing his Shellroot boot.img and recovery.img files
(the guy who has made it easy)
Now Credits to myself as usual Dmedalion of Gursulodge for the "Made easy Tutorial' ...hehehe

.............
Requirements :

SP_Flash_Tool_v3.1224.01

TecnoL3 Boot + recovery ShellRoot kit by nekedchris

MT6577 USB VCOM drivers

mtkdroidtools-v248

USBDview

MT6575_Android_scatter_emmc.txt


.................
NOw this above files are all packed in the below ROOTkit

...
after downloading unpack all to their seperate folders.

...
follow this link to install MTKDrivers correctly without any feature error

http://forum.xda-developers.com/showthread.php?t=2206421

http://www1.datafilehost.com/d/6d74e15a

http://www1.datafilehost.com/d/5de778b0



when your driver is properly installed, 

then Open Flashtool You'll need to load the Scatter

Open SPFlashtool and check the far right corner of the app and click on [scatter-loadind]

locate the [MT6575_Android_scatter_emmc.txt] file u extracted earlier.

after loading..scroll down then list of HEX values and tick [Bootimg]

then click on the name 'bootimg' .

a page pops up then locate the [L3_130613__boot_patched_130804-160810.img] file which u extracted

earlier from [TecnoL3 Boot + recovery ShellRoot...] inside the rootkit and load it,


do the same for the next option below [BOOTIMG] which is Recoveryimg. 

and load the second file[L3_130613__recovery_130804-160810.img] inside the [TecnoL3 Boot + recovery ShellRoot...] folder.


after loding both file . click on [Downolad] at the top tab of sp flashtool..

now connect ur device via USB with battery in it but switched off.

A red process bar should popup below and wait for it to finish till u c a green circle pop-up.. 

now unplug ur device and switch it on.

MTKDroidTools. device needs to be connected and debugging enabled. 

switch to "root, backup, recovery" and press on " SuperUser". this will push superuser, SU
binary and busybox to your device.


Your Device is NOW rooted ...............

HOW TO ROOT TECNO PHANTOM A+ AND F7

Root Tecno A1 or F7 phones is easy so dont be confuse just follow me and your phone will be rooted like magic



1. Download and install the compactible version of


PDA.net for your PC OS 

http://pdanet.co/a/
.
2. Download ERoot from. 
.

https://www.dropbox.com/s/cplsu3utpq855k9/eroot_v1.3.3.zip


3. Connect your phone to your PC


4. Enable USB debugging on your Android phone in


Settings > Applications > Development.


5. Install the PDA.net you downloaded earlier on your PC.


6. During the installation you'll be prompted to select your cell phone manufacturer and 

also connect yourdevice via USB.


7. Click on Ok and allow to install


8. Extract and run the ERoot downloaded. Ignore the Chinese Language displayed.

9. A root button would appear. If it doesn't, close the pda.net running from your system tray.

10. Click on the root button and your phone would be


rooted in 10 seconds.


11. Disconnect your phone from your pc or laptop.


12. Goto your menu and you will find superuser installed.


13. Reboot your Tecno Phantom A1 or F7.


14. Congratulations your phone is now rooted

HOW TO ROOT GALAXY POCKET

Samsung Galaxy Pocket is the latest addition to the galaxy series and it is among the smallest android handsets around running Android 2.3 Gingerbread.  Again Samsung has made it extremely easy for developers to root Samsung Galaxy Pocket and unlock the phone like other Android handsets of  the Galaxy series. We have extracted this guide from XDA developer Forum, so we believe that this guide is safe and effective. With a rooted Samsung Galaxy Pocket, you’ll be able to enjoy applications that need root access;custom ROM’s and can even overclock your smartphone’s processor. The guide is safe and has been tested to be working for most of the Samsung Galaxy Pocket users but still we or developers shouldn’t be held responsible for any damage that might occur to your device by following this guide.

 Before you begin, please take a moment to read out pre requisites and preliminary steps that are extremely necessary to be followed.

 Before you begin:

• Rooting the phone will void its warranty.  So you may have to install the stock firmware to get back your warranty.
• Make a backup of all the important data in your phone including contacts, messages and important applications.
• Make sure that your phone has more than 50% of battery.
• Install all the required Samsung USB drivers required to connect your mobile with PC.  I would suggest you to installKIES 2.0 in your PC which will automatically install all the required drivers.
• Lastly don’t forget to enable USB debugging option in your phone. For enabling it, go to:

Settings > Applications > Development > USB Debugging 

 

How to Root Samsung Galaxy Pocket S5300:

1. First of all download the rooting package on your computer and transfer it to your SD card by connecting your phone to computer in USB mass storage mode.
2. Now switch off your phone and remove the battery. Put the battery back again and restart it back again into recovery mode.
3. For entering into recovery mode, press the Volume Up button, Menu button (center button) and Power key all  together simultaneously.
4. Once you have booted into recovery mode, choose the option“install zip from SD card” and choose the file that we copied in SD card above.   You can use volume key to navigate through the available options.
5. Confirm the installation by pressing yes and wait until the process completes.
6. Up next, press back key and choose the “reboot system now”option.

 

That’s it,you have a rooted the Galaxy Pocket in your hand.

To verify that whether your phone is rooted or not, open the app drawer in your phone and look for “super user app”; if it’s there, your phone is rooted. Just in case, if you don’t find any super user app, you may have to repeat the whole process from the very beginning.

HOW TO INSTALL APPS OR GAMES ON IPHONE OUTTA ITUNES

Installation guide: (when you downloading files to your PC)
    1. Download the ipa game file.
    2. Install the game.


How to install the game on the iPhone, iPod, iPad
Requirements:
    Internet connection (Wi-Fi, 3G, GPRS)
    Jailbreaked device
    Account in the App Store
    Installed ITunes on your PC


Necessary steps to prepare your device:
    1. Open Cydia
    2. Go to Manage > Sources > Edit > Add > http://cydia.hackulo.us > Add Source (on iPad: Sources > Edit > Add)
    3. Then go to Sections > Hackulo.us
    4. Select AppSync for 5.x+ (or OS 3.x+, or 4.x+ depending on your firmware)
    5. Click Install > Confirm
    6. Reboot your device


Necessary steps to install the game:
    1. Download any game to your computer.
    2. Double click it and it appears in iTunes > iTunes Software
    3. Go to your device via iTunes > iPhone > Programs and check the game/app (or make sure that it is already checked)
    4. Click Synchronize

How to root tecno phanton A F7

How To Root Tecno Phantom A

(Tecno F7) There are no limit to the possibilities one can achieve on a rooted Android device compared to one that isn't rooted. As you know, Rooting is to Androin as Jailbreak is to iOS. For those that don't know what rooting means, a little definition will suffice. Rooting basically means that you install a set of programs on your phone that gives you total control over your device. Total control means that you have the right to install any applications or even delete core applications that you don't want.  Simply put, you have administrative rights over your device, giving you super user access, and of course, you can use DroidVPN to have free unlimited internet. The guide below shows how you can root Tecno Phantom A also known as Tecno F7 and its super

easy to achieve. Don't forget to like us on Facebook. Requirements 1. Computer with internet connection

2. PdaNet+ V4.12 zipped file 3.eroot_v1.3.3 zipped file 4. USB to connect your device to the computer

5. Backup your phone data just in case.

6. For some that couldn't get drivers for their Tecno F7, you can install Mobilego Notes 1. Rooting your phone voids your warranty

2. Anything that happens while rooting your device is on you. You are doing it at your own risk

3. There are softwares to unroot your phone if you don't want the rooting option again. Procedures 1. Connect your Tecno F7 to the computer 2. Download PdaNet+ V4.12 and eroot_v1.3.3 to your desktop and unpack in a folder called Rooting. 3. Install the PdaNet+ V4.12 as shown in the image below. 4. If you have already installed the driver of your F7 in the computer before at one time, you can chooseNo in the dialogue box shown to you otherwise, selectYes. A box would show up asking you to either Skip or Cancel Installation. Leave it and move to the next step 5. Next you need to enable debugging mode on your phone. To do this, go to Settings, scroll to Developer Option, tap on it and then select USB debugging, click OK at the prompt and then exit. 6.  Once your device is detected by the computer and its in USB debug mode, a pop-up would show up to install a software from June Fabrics Technology. Click Install and let it finish its installation which would take place on your device too. 7. Run the eroot you downloaded earlier, it would display in Chinese, don't worry. 8. It would detect your device and then you will see the big bold Root menu. Click on Root and you would be rooted in no time. 9. Disconnect the USB connection,now locate you Phone menu, You will be able to Find a New Application Installed on your Phone with name ‘Superuser'. 10. Reboot your Tecno F7 and you will be good to go with a rooted Tecno Phantom A smartphone. Guys, I hope you find this information useful. I have tried it and my Tecno F7 is rooted. Give it a try and enjoy the limitless possibilities of rooting. Don't forget to share your success stories for others to read and learn from your mistakes if you had one. Also, give full info if its not working for you. Don't just say "its not working". Give details.

This is how to install NEW iOS 7 without a Dev account or UDID

Please Read
This is how to install NEW iOS 7 without a Dev account or UDID

Step 1 Download the latest official iOS for your device This will be iOS 6.1.4 for iPhone 5 and iOS 6.1.4 for all other supported devices: http://www.felixbruns.de/iPod/firmware/

(Download Link for iPhone 5 GSM AT&T 6.1.4) http://tinyurl.com/iPhone5GSMAT-T

Step 2 Download NEW iOS 7 Beta 3 for your device: http://www.iosday.com/ios-7-beta-down...

Step 3 make sure your device is connected via USB and open up iTunes on restore hit the shift and left mouse click buttons down together this will allow you to manually search for the iOS you downloaded for iPhone 5 you would select iOS 6.1.4 for all other devices you would select iOS 6.1.3

Step 4 Once the device has restored make sure to setup as new and that you get to the home screen.

Step 5 Now on the Check for updates button hit shift and left mouse click down together this time you need to select iOS 7 for your device now when the device finishes updating it will be on iOS 7 activated.

IMPORTANT the device will work as normal you can Sync from a saved backup install apps, make calls and messages / iMessage etc... also you will be able to OTA all the upcoming beta's.

Enjoy

HOW TO ROOT ANY CHAINA ANDROID

[center]REQUIREMENTS[/center]
1. A laptop or desktop.
2.An internet Bundle to download file of 30mb.
3.A Usb cable.
And off-course Any 4.o Android Phone.
pls this is not app its a hack so I am not responsible for any damages or problems your device encounters.NB-if you click on the runme.bat file and the proccess goes on without rooting your phone,pls try backing up your apps and do a factory reset then try again and if it persist then go to page 1 of this tread and try the other method by Davit.

Download any android Debugging app that will let you install android driver and let your phone connect with your pc, apps like http://pdanet.co/a or download this http://snappea.en.softonic.com/ used for many purpose like moving all apps to SD

Download this file http://205.196.120.206/456kv5f0zm3g/aluaaotbbuv5g7k/Root_with_Restore_by_Bin4ry_v18_2.7z or download from here tmlhttp://www.4shared.com/archive/CpycuhV-/Root_with_Restore_by_Bin4ry_v1.h


Install the Debugging app and when it prompts you to plug you phone,do it quickly and make sure it installs the drivers. If that is well done close the App on your pc.

OPen the root with Restore you downloaded extract it to any folder in your pc .
Run the Runme.bat file, a command prompt window will open 
when it prompts for an option.
 PRESS 1 and it will continue to execute the task.
Then after that another window will open in your phone  PLEASE ENTER YOUR DEVICE ENCRYPTION PASSWORD BELOW,when you see that dont mind it ignore it and just click RESTORE MY DATA below and wait for the process to finish
. Your device will restart, and if you see the SUPER SU  

icon on your apps drawer it means that you had successfully rooted your phone.
GOODLUCK. if you wanna learn more go here [url]http://hdc-galaxy.com/how-to-root-any-chinese-android-running-android-4-0-ics4-1-jb/
[/url]

GINGERBEAN FOR TECNO N3 CUSTOM ROM

Please note: the installation of custom roms can literally (i.e. practically) damage your device; henceeee, i'll say this quickly: lexsolutionz or any of its staff are not responsible for any damage resulting from any action carried out by you truly.

regardless....the pros(successes) are better than the cons (risks)...soooo...lets get modding
Nowwww, with that being said, you must follow these steps one by one
Guide to installation of Ginger-bean:
Prelude: STOP! ANSWER YES TO ALL THESE QUESTIONS B4 YOU PROCEED FUTHER!!!!!!
ask yourself the following:
a. Have you backed up all your data to your SD or PC? if not, you must do so immediately especially your contacts (goto contacts menu, import/export, backup to SD)
b. Have you done a nandroid backup of your present rom? easiest way out of a Brick? if not, you must go to google play and download "online nandroid backup". when youve done so, run online nandroid backup, you will need an internet connection to update the nandroid scripts. select clockworkmod mode, then click "start backup" (note : have atlest 512MB on your SD card). the backup should take about 20 mins
c. do you have ADB driver for N3 installed? if no go here to find out how to do so:[url] http://www.nairaland.com/1261265/solution-boot-loop-bricked-techno#15537985[/url]
d. seriously know what your doing ?
d. Are you human yet are utterly into living on the edge ?
step 1-download the modded boot image (get here https://www.dropbox.com/s/k52ryk51nna0z8v/boot.img?v=0mcng)
step 2-download tools needed (get here https://www.dropbox.com/s/g1nkd5bthu1v4dq/tools_needed.zip?v=0mcng)
step 3-download N3 system img, its uploaded in split file (10 in all), here are the links:
1. https://www.dropbox.com/s/dlru2mnwc8093qq/sys.yaffs2.7z.001?v=0mcng
2.https://www.dropbox.com/s/egk8d0dv7tyds18/sys.yaffs2.7z.002?v=0mcng
3. https://www.dropbox.com/s/ca3nu4z5hh8ptjb/sys.yaffs2.7z.003?v=0mcng
4. https://www.dropbox.com/s/9ip531uhq79hfkv/sys.yaffs2.7z.004?v=0mcng
5. https://www.dropbox.com/s/58lofogl9fom5ar/sys.yaffs2.7z.005?v=0mcng
6. https://www.dropbox.com/s/3qxcx3wxlrfm29u/sys.yaffs2.7z.006?v=0mcng
7. https://www.dropbox.com/s/74djkpzpuew5ofa/sys.yaffs2.7z.007?v=0mcng
8. https://www.dropbox.com/s/ssnwsjer87nptpo/sys.yaffs2.7z.008?v=0mcng
9. https://www.dropbox.com/s/4z5fbj0dtihwlzr/sys.yaffs2.7z.009?v=0mcng
and
10.https://www.dropbox.com/s/n95nk52fx6g65x1/sys.yaffs2.7z.010?v=0mcng

step 4- extract contents of tools_needed folder and install 7zip

step 5- use 7zip to extract the 10 split sys.yaffs2.img file (this can be done by copying them to the same folder the right clicking and selecting 7zip, extract archive)

step 6- boot your N3 into fast boot mode (this is done easily by removing the battery, and while holding volume-down button on plug in your usb cable, then wait till you see the TECNO logo displayed on the screen, wait for 5 second then release the volume-down button)

step 7 FLASHING THE TECNO:

At juncture you need to stop every other thing youve been doing while you wer doing this and concerntrate!!!

(Girl, allow that boy not to brick his phone o! and O boy, stop that Pinging O. Anyway, we have already said we'er not responsible for casualties)
[/i]were ready to flash...

At this point i'm right to guess we've all installed our ADB drivers using the [i]Android universal ADB installer. if not go here to find out how to do so [url] http://www.nairaland.com/1261265/solution-boot-loop-bricked-techno#15537985[/url]
now, run Android AIO flasher.exe (found in tools needed folder)
next, in the AIO flasher window, the very first menu is what concerns us i.e. where its written fastboot flasher (Nandroid Restorer)(the others we shall explain in later tutorials)
click boot
click Select file(browse to where you saved the boot.img you downloaded above)
click erase
click flash

YOU MUST wait for the black window below to show "writing boot...OK" before you know its done

Congratulations your almost done!!

Simply repeat the same process for the sys.yaffs2.img file, only this time, we go:
click System
click Select file(browse to where you saved the sys.yaffs2.img you downloaded above)
click erase
click flash

once again
YOU MUST wait for the black window below to show "writing sys.yaffs2.img OK" before you know its done.
it should take about 50 seconds, depending on your system specs.

Lastly, unplug the usb cable,
now, while holding "volume-up" plug it back
keep holding volume up till you enter the Android 3e stock recovery menu.
using volume up and down to move
select "wipe cache", PRESS power button to select
when this is finished
select "wipe data/factory reset"

when this is done restart your phone
these last two steps are important..else you may have boot-loop

well..guess thats pretty much it. regarding the memory boost..i will post that momentarily.
feel free to post feedback here
courtesy..lexsolutionz

How to install Android OS on Mini Laptop HP Notebook

How to install Android OS on Mini Laptop HP Notebook

Android on Your Netbook or Desktop
Would you like to try out Google’s Android OS on your netbook or desktop? Here’s how you can run Android from a flash drive and see how fast Android can run on real hardware!
Install Android On Your Flash Drive or Memory Card
First, make sure you have a flash drive or memory card inserted into your computer with around 256MB or more storage space. Remove any files you may need off of the drive, so you can use it to run Android on your computer.
Now you’re ready to download and setup Android on your drive. Head over to the Android x86 download page http://www.android-x86.org/download, scroll down to the StableRelease section, and click View under Android-x86-3.2-RC2.iso. This will start the iso file downloading to your computer.
In the mean time, head over to the UNetbootin site http://unetbootin.sourceforge.net/, and download it as well.
Once your downloads are complete, run UNetbootin. Click the bullet beside Diskimage, then click the “… “ button and select the Android ISO file you just downloaded. Finally, select the correct flash drive or memory card in the menu on the bottom, and click Ok.
UNetbootin will now copy the files to your flash drive. This may take a few moments, depending on your flash drive’s speed.
Once it’s finished, it will ask if you wish to reboot. If you want to go ahead and run Android, you can click Reboot; otherwise, just exit and run Android from your flash drive when you want.
If you want to try Android on a computer that has a CD/DVD drive, you could just burn the ISO to a disk and boot from it. Netbooks don’t have CD drives, and even on a desktop, it can be nice to not waste a CD just for this. If you want to burn it to a disk, you can do it easily from Windows 7 or with a free program such as ImgBurn.
Using Android-x86 On Your Computer
Now you’re ready to run Android on your netbook, laptop, or even a full desktop computer. Simply reboot your computer with the USB drive, and select to boot from it. Not all computers will automatically boot from a USB device, so you may have to press F2, F10, or another key, depending on your computer, and change the Boot options in the bios.
Now, when you boot from the USB drive, select Live CD – Run Android-x86 without installation.
You’ll see a text prompt for a few moments as Android begins to load.
Then you’ll see the Android boot screen, though we only saw it for a moment, as our computer booted really fast into Android.
After a couple seconds, you’ll see the Android desktop … on your netbook or computer! You can quickly access one of the apps on the home screen, or open the menu to see more options.
Thank you so much.

SEND UNLIMITED TEXT MESSAGES FREE ON YOUR MTN LINES

Goodnews all MTN Users am back with hottest and latest
trick you can now send free sms To all networks in Nigeria
using below trick...
After typing your message when putting receivers number
start the number with plus, e'g +08033333333 , it is
tested and comfirmed and even if u have money Mtn will
not remove a dim. Enjoy Guys and expect more from Us...

HOW TO INSTALL JAVA APPS ON UR TECNO N3

HOW TO RUN JAVA APPLICATIONS
ON TECNO N3(ROOTED)AND ANY
OTHER ROOTED ANDROID PHONE

NOTE: JBED IS THE ANDROID JAVA
EMULATOR THAT ENABLES YOU TO RUN JAVA APPS ON YOUR ANDROID SMARTPHONE.

INSTALLATION STEPS:

1. DOWNLOAD JBED FROM
http://db.tt/Ai7qWOtj AND INSTALL
(DONT OPEN/LAUNCH! IT YET OR
YOU WILL GET ERRORS)

2 FILE EXPLORER download here http://db.tt/jGGO2TWV

3 DOWNLOAD IT AND INSTALL

4 Download  FILE EXPLORER(ROOT ADD-ON)here http://db.tt/xaB8k4n7

5 DOWNLOAD IT AND INSTALL

6 DOWNLOAD LIBJBEDVM.SO FROM http://db.tt/DcNItM7E

7 LAUNCH FILE EXPLORER,CLICK
ON SYSTEM(ROOT)
WHEN IT POPS OUT ROOT
AUTHORIZATION,CLICK OK ALL
FOLDERS WILL APPEAR

8.CLICK ON SDCARD FOLDER AND
LOCATE WHERE YOU SAVED THE
LIBJBEDVM.SO FILE
COPY THE FILE BY PRESS AND HOLD
ON THE APP TO GET OPTIONA
WHERE YOU WILL SELECT COPY

9.AT THE BOTTOM FO YOUR
SCREEN,CLICK ON WINDOW AND
SELECT NEW WINDOW
CLICK ON SYSTEM(ROOT) AND
CLICK ON THE SYSTEM FOLDER
CLICK ON LIB FOLDER(THIS IS
WHERE YOU WILL PASTE THE FILE
YOU COPIED) DONT PASTE IT YET
COS IF YOU TRY TO,ALL YOU WILL
GET IS ERROR

10 ON THE TOP OF YOUR
SCREEN,YOU WILL SEE ALOCKED
PADLOCK ICON.CLICK ON IT TO
UNLOCK
IF IT POPS OUT A WARNING,TICK I
UNDERSTAND AND CLICK OK.
ON TOP OF YOUR SCREEN,YOU WILL SEE(CLIPBOARD 1 ITEM
COPIED),CLICK ON IT AND SELECT
PASTE.
THE COPIED ITEM WILL
PASTE,AFTER THAT,CLICK ON THE
PADLOCK ICON TO LOCK IT BACK
FOR SECURITY REASONS

11 RESTART YOUR PHONE,WHEN IT BOOT FINISH,LAUNCH JBED(JAVA)
CLICK ON THE LFET TOUCH KEY OF
YOUR PHONE AND SELECT SDCARD.
ALL YOUR JAVA APPLICATIONS
WILL APPEAR,SELECTANY ONE YOU LIKE AND SELECT SDCARD  AS
INSTALLING FOLDER
CLICK OK TO ANY WARNING.IT
WILL INSTALL AND YOU CAN NOW
LAUNCH YOUR JAVA APP
AND ENJOY.
WILL ADD SCREENSHOTS LATER

DONT FORGET TO INDICATE IF IT
WORKS FOR YOU

All files dropbox by me to make it easier.

Airtel tweak

Airtel 140MB cheat
#Steps:
1-load #100 airtime
2-send socialday to 4403
keep doing it,until the 100naira is zapped,
then dial *123*10#...u would see 140mb
it last for 1 month
you can also repeat the step to
get more



This is working ooo...If you doubt you are on ur own

If it work come back and testify

how to update ur blackberry OS on ur own

-make sure you have blackberry desktop manager (the latest if possible)
-u can download the os from RIM website!!
-install it on ur system like every other program!!
-plug your fone on ur pc
-this is the tricky part. there is a file that you have to delete so that your desktop manager will not have to go online to look for the os n start downloading it (kind of online upgrade which NEPA will not allow.)
-and once the desktop manager detects the new os on the pc it will start installing almost immediately!!!
 Offline Upgrade

You need some software related. I usually use BlackBerry Desktop Software, BBHybrids Tool, and BlackBerry OS (Operating System).



-BlackBerry Desktop Software (use the latest)http://us.blackberry.com/apps-software/desktop/desktop_pc.jsp

-BBHybrids Tool  http://vmancer.com/shrink-a-os-blackberry-os-bbhybrids-tool/

-BlackBerry OS http://www.vodafone.de/business/blackberry-support/blackberry-curve-9300.html 
 
 Step by step

-Install the BlackBerry Desktop Software and BlackBerry OS (BlackBerry Device Software).
-In directory C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\9300AllLang_v6.0.0.448_P6.6.0.124\Java, delete file vendor.xml. The directory is hidden by default. You have to bring it through Folder Options (first image below).
-Run BBHybrids Tool and do Wipe Device, then close the software (second image below).
-Run BlackBerry Desktop Software then will be detected there is no OS on your BlackBerry. It would offer to do the OS installation process (first right image below).

Process will run automatically like on online update process. Allowed if there is request to create backup (backup should be made prior to this process).





Note:
-Consider whether to upgrade your BlackBerry OS. Maybe you did not get improved performance, but on the contrary.
-This article based on my experience, may vary from that written on a blog or another website. I was confused because it differs from the article ever read.
-I am not the expert on this, maybe I forgot to write one or two steps.
-Do not ever interrupt the upgrade process because it can damage the hardware. Damage can also occur due to unintentional, such as power failure, lost internet connection, and others.

lucky pacther

remove the liecense of ur trial apps

https://www.dropbox.com/s/qs12kqegw07wkly/Lucky%20Patcher%20v3.0.4.apk

power AMP

powerfull mp3 player will amplifier

https://www.dropbox.com/s/kmvly9ff6i50w26/Poweramp-2.0.9-build-526.apk

droidwall

droidwall to block unwanted under ground working apps

https://www.dropbox.com/s/6lqbe03uf8u6p6c/DroidVPN_1.8.7c.apk

here is poot tecno N3 rooting file

1: install poot on ur tecno n3 make sure u have internet on ur n3

https://www.dropbox.com/s/ji07uxexez2ppbp/Poot-debug-tecno%2Bn3.apk?m

2: open poot and allow it to run on ur n3
3: it will ask to install ministro from playstore allow it to do so by it self but it will take some minute to do the running
4: after it finish installing ministro then open poot again and u will see two option click on the first one. this stage it depends on ur luck coz it wont root ones like that u will keep on trying it until it will show u three option the will be (click to install super user) just click on it and u will see super user in ur phone.
4: install root check from playstore then run it and it will show that congratulation ur device is rooted

Our facebook page

our facebook page
U can get alot of file on our page on facebook
www.facebook.com/smarthphones-update

SRS ROOT

This Software is build to make it easy to root an android device.
It has several methods and solutions build in to make it possible to ROOT your device with just a single click.

How does this works ?
- Step 1: Enable 'USB debugging' on your device (you can find this in the settings menu)
- Step 2: Enable 'Unknown Sources' on your device (Also under settings)
- Step 3: Connect your device to the computer (If needed install the android drivers)
- Step 4: Click on one of the ROOT options in this software, and wait till it's finished



[x] Server Status: All Systems Online.

Happy Rooting

https://www.dropbox.com/s/somkc568y98yi1o/SRSRoot-Setup.exe

WELCOME

hi guys! 

              i welcome you all here from www.facebook.com/smarthphones-update/ down here. thanks for your support and the love you all have on my page. MAY GOD BLESS OUR HUSTLE.