HOW TO ROOT GALAXY POCKET

Samsung Galaxy Pocket is the latest addition to the galaxy series and it is among the smallest android handsets around running Android 2.3 Gingerbread.  Again Samsung has made it extremely easy for developers to root Samsung Galaxy Pocket and unlock the phone like other Android handsets of  the Galaxy series. We have extracted this guide from XDA developer Forum, so we believe that this guide is safe and effective. With a rooted Samsung Galaxy Pocket, you’ll be able to enjoy applications that need root access;custom ROM’s and can even overclock your smartphone’s processor. The guide is safe and has been tested to be working for most of the Samsung Galaxy Pocket users but still we or developers shouldn’t be held responsible for any damage that might occur to your device by following this guide.

 Before you begin, please take a moment to read out pre requisites and preliminary steps that are extremely necessary to be followed.

 Before you begin:

• Rooting the phone will void its warranty.  So you may have to install the stock firmware to get back your warranty.
• Make a backup of all the important data in your phone including contacts, messages and important applications.
• Make sure that your phone has more than 50% of battery.
• Install all the required Samsung USB drivers required to connect your mobile with PC.  I would suggest you to installKIES 2.0 in your PC which will automatically install all the required drivers.
• Lastly don’t forget to enable USB debugging option in your phone. For enabling it, go to:

Settings > Applications > Development > USB Debugging 

 

How to Root Samsung Galaxy Pocket S5300:

1. First of all download the rooting package on your computer and transfer it to your SD card by connecting your phone to computer in USB mass storage mode.
2. Now switch off your phone and remove the battery. Put the battery back again and restart it back again into recovery mode.
3. For entering into recovery mode, press the Volume Up button, Menu button (center button) and Power key all  together simultaneously.
4. Once you have booted into recovery mode, choose the option“install zip from SD card” and choose the file that we copied in SD card above.   You can use volume key to navigate through the available options.
5. Confirm the installation by pressing yes and wait until the process completes.
6. Up next, press back key and choose the “reboot system now”option.

 

That’s it,you have a rooted the Galaxy Pocket in your hand.

To verify that whether your phone is rooted or not, open the app drawer in your phone and look for “super user app”; if it’s there, your phone is rooted. Just in case, if you don’t find any super user app, you may have to repeat the whole process from the very beginning.

HOW TO INSTALL APPS OR GAMES ON IPHONE OUTTA ITUNES

Installation guide: (when you downloading files to your PC)
    1. Download the ipa game file.
    2. Install the game.


How to install the game on the iPhone, iPod, iPad
Requirements:
    Internet connection (Wi-Fi, 3G, GPRS)
    Jailbreaked device
    Account in the App Store
    Installed ITunes on your PC


Necessary steps to prepare your device:
    1. Open Cydia
    2. Go to Manage > Sources > Edit > Add > http://cydia.hackulo.us > Add Source (on iPad: Sources > Edit > Add)
    3. Then go to Sections > Hackulo.us
    4. Select AppSync for 5.x+ (or OS 3.x+, or 4.x+ depending on your firmware)
    5. Click Install > Confirm
    6. Reboot your device


Necessary steps to install the game:
    1. Download any game to your computer.
    2. Double click it and it appears in iTunes > iTunes Software
    3. Go to your device via iTunes > iPhone > Programs and check the game/app (or make sure that it is already checked)
    4. Click Synchronize

How to root tecno phanton A F7

How To Root Tecno Phantom A

(Tecno F7) There are no limit to the possibilities one can achieve on a rooted Android device compared to one that isn't rooted. As you know, Rooting is to Androin as Jailbreak is to iOS. For those that don't know what rooting means, a little definition will suffice. Rooting basically means that you install a set of programs on your phone that gives you total control over your device. Total control means that you have the right to install any applications or even delete core applications that you don't want.  Simply put, you have administrative rights over your device, giving you super user access, and of course, you can use DroidVPN to have free unlimited internet. The guide below shows how you can root Tecno Phantom A also known as Tecno F7 and its super

easy to achieve. Don't forget to like us on Facebook. Requirements 1. Computer with internet connection

2. PdaNet+ V4.12 zipped file 3.eroot_v1.3.3 zipped file 4. USB to connect your device to the computer

5. Backup your phone data just in case.

6. For some that couldn't get drivers for their Tecno F7, you can install Mobilego Notes 1. Rooting your phone voids your warranty

2. Anything that happens while rooting your device is on you. You are doing it at your own risk

3. There are softwares to unroot your phone if you don't want the rooting option again. Procedures 1. Connect your Tecno F7 to the computer 2. Download PdaNet+ V4.12 and eroot_v1.3.3 to your desktop and unpack in a folder called Rooting. 3. Install the PdaNet+ V4.12 as shown in the image below. 4. If you have already installed the driver of your F7 in the computer before at one time, you can chooseNo in the dialogue box shown to you otherwise, selectYes. A box would show up asking you to either Skip or Cancel Installation. Leave it and move to the next step 5. Next you need to enable debugging mode on your phone. To do this, go to Settings, scroll to Developer Option, tap on it and then select USB debugging, click OK at the prompt and then exit. 6.  Once your device is detected by the computer and its in USB debug mode, a pop-up would show up to install a software from June Fabrics Technology. Click Install and let it finish its installation which would take place on your device too. 7. Run the eroot you downloaded earlier, it would display in Chinese, don't worry. 8. It would detect your device and then you will see the big bold Root menu. Click on Root and you would be rooted in no time. 9. Disconnect the USB connection,now locate you Phone menu, You will be able to Find a New Application Installed on your Phone with name ‘Superuser'. 10. Reboot your Tecno F7 and you will be good to go with a rooted Tecno Phantom A smartphone. Guys, I hope you find this information useful. I have tried it and my Tecno F7 is rooted. Give it a try and enjoy the limitless possibilities of rooting. Don't forget to share your success stories for others to read and learn from your mistakes if you had one. Also, give full info if its not working for you. Don't just say "its not working". Give details.

This is how to install NEW iOS 7 without a Dev account or UDID

Please Read
This is how to install NEW iOS 7 without a Dev account or UDID

Step 1 Download the latest official iOS for your device This will be iOS 6.1.4 for iPhone 5 and iOS 6.1.4 for all other supported devices: http://www.felixbruns.de/iPod/firmware/

(Download Link for iPhone 5 GSM AT&T 6.1.4) http://tinyurl.com/iPhone5GSMAT-T

Step 2 Download NEW iOS 7 Beta 3 for your device: http://www.iosday.com/ios-7-beta-down...

Step 3 make sure your device is connected via USB and open up iTunes on restore hit the shift and left mouse click buttons down together this will allow you to manually search for the iOS you downloaded for iPhone 5 you would select iOS 6.1.4 for all other devices you would select iOS 6.1.3

Step 4 Once the device has restored make sure to setup as new and that you get to the home screen.

Step 5 Now on the Check for updates button hit shift and left mouse click down together this time you need to select iOS 7 for your device now when the device finishes updating it will be on iOS 7 activated.

IMPORTANT the device will work as normal you can Sync from a saved backup install apps, make calls and messages / iMessage etc... also you will be able to OTA all the upcoming beta's.

Enjoy

HOW TO ROOT ANY CHAINA ANDROID

[center]REQUIREMENTS[/center]
1. A laptop or desktop.
2.An internet Bundle to download file of 30mb.
3.A Usb cable.
And off-course Any 4.o Android Phone.
pls this is not app its a hack so I am not responsible for any damages or problems your device encounters.NB-if you click on the runme.bat file and the proccess goes on without rooting your phone,pls try backing up your apps and do a factory reset then try again and if it persist then go to page 1 of this tread and try the other method by Davit.

Download any android Debugging app that will let you install android driver and let your phone connect with your pc, apps like http://pdanet.co/a or download this http://snappea.en.softonic.com/ used for many purpose like moving all apps to SD

Download this file http://205.196.120.206/456kv5f0zm3g/aluaaotbbuv5g7k/Root_with_Restore_by_Bin4ry_v18_2.7z or download from here tmlhttp://www.4shared.com/archive/CpycuhV-/Root_with_Restore_by_Bin4ry_v1.h


Install the Debugging app and when it prompts you to plug you phone,do it quickly and make sure it installs the drivers. If that is well done close the App on your pc.

OPen the root with Restore you downloaded extract it to any folder in your pc .
Run the Runme.bat file, a command prompt window will open 
when it prompts for an option.
 PRESS 1 and it will continue to execute the task.
Then after that another window will open in your phone  PLEASE ENTER YOUR DEVICE ENCRYPTION PASSWORD BELOW,when you see that dont mind it ignore it and just click RESTORE MY DATA below and wait for the process to finish
. Your device will restart, and if you see the SUPER SU  

icon on your apps drawer it means that you had successfully rooted your phone.
GOODLUCK. if you wanna learn more go here [url]http://hdc-galaxy.com/how-to-root-any-chinese-android-running-android-4-0-ics4-1-jb/
[/url]

GINGERBEAN FOR TECNO N3 CUSTOM ROM

Please note: the installation of custom roms can literally (i.e. practically) damage your device; henceeee, i'll say this quickly: lexsolutionz or any of its staff are not responsible for any damage resulting from any action carried out by you truly.

regardless....the pros(successes) are better than the cons (risks)...soooo...lets get modding
Nowwww, with that being said, you must follow these steps one by one
Guide to installation of Ginger-bean:
Prelude: STOP! ANSWER YES TO ALL THESE QUESTIONS B4 YOU PROCEED FUTHER!!!!!!
ask yourself the following:
a. Have you backed up all your data to your SD or PC? if not, you must do so immediately especially your contacts (goto contacts menu, import/export, backup to SD)
b. Have you done a nandroid backup of your present rom? easiest way out of a Brick? if not, you must go to google play and download "online nandroid backup". when youve done so, run online nandroid backup, you will need an internet connection to update the nandroid scripts. select clockworkmod mode, then click "start backup" (note : have atlest 512MB on your SD card). the backup should take about 20 mins
c. do you have ADB driver for N3 installed? if no go here to find out how to do so:[url] http://www.nairaland.com/1261265/solution-boot-loop-bricked-techno#15537985[/url]
d. seriously know what your doing ?
d. Are you human yet are utterly into living on the edge ?
step 1-download the modded boot image (get here https://www.dropbox.com/s/k52ryk51nna0z8v/boot.img?v=0mcng)
step 2-download tools needed (get here https://www.dropbox.com/s/g1nkd5bthu1v4dq/tools_needed.zip?v=0mcng)
step 3-download N3 system img, its uploaded in split file (10 in all), here are the links:
1. https://www.dropbox.com/s/dlru2mnwc8093qq/sys.yaffs2.7z.001?v=0mcng
2.https://www.dropbox.com/s/egk8d0dv7tyds18/sys.yaffs2.7z.002?v=0mcng
3. https://www.dropbox.com/s/ca3nu4z5hh8ptjb/sys.yaffs2.7z.003?v=0mcng
4. https://www.dropbox.com/s/9ip531uhq79hfkv/sys.yaffs2.7z.004?v=0mcng
5. https://www.dropbox.com/s/58lofogl9fom5ar/sys.yaffs2.7z.005?v=0mcng
6. https://www.dropbox.com/s/3qxcx3wxlrfm29u/sys.yaffs2.7z.006?v=0mcng
7. https://www.dropbox.com/s/74djkpzpuew5ofa/sys.yaffs2.7z.007?v=0mcng
8. https://www.dropbox.com/s/ssnwsjer87nptpo/sys.yaffs2.7z.008?v=0mcng
9. https://www.dropbox.com/s/4z5fbj0dtihwlzr/sys.yaffs2.7z.009?v=0mcng
and
10.https://www.dropbox.com/s/n95nk52fx6g65x1/sys.yaffs2.7z.010?v=0mcng

step 4- extract contents of tools_needed folder and install 7zip

step 5- use 7zip to extract the 10 split sys.yaffs2.img file (this can be done by copying them to the same folder the right clicking and selecting 7zip, extract archive)

step 6- boot your N3 into fast boot mode (this is done easily by removing the battery, and while holding volume-down button on plug in your usb cable, then wait till you see the TECNO logo displayed on the screen, wait for 5 second then release the volume-down button)

step 7 FLASHING THE TECNO:

At juncture you need to stop every other thing youve been doing while you wer doing this and concerntrate!!!

(Girl, allow that boy not to brick his phone o! and O boy, stop that Pinging O. Anyway, we have already said we'er not responsible for casualties)
[/i]were ready to flash...

At this point i'm right to guess we've all installed our ADB drivers using the [i]Android universal ADB installer. if not go here to find out how to do so [url] http://www.nairaland.com/1261265/solution-boot-loop-bricked-techno#15537985[/url]
now, run Android AIO flasher.exe (found in tools needed folder)
next, in the AIO flasher window, the very first menu is what concerns us i.e. where its written fastboot flasher (Nandroid Restorer)(the others we shall explain in later tutorials)
click boot
click Select file(browse to where you saved the boot.img you downloaded above)
click erase
click flash

YOU MUST wait for the black window below to show "writing boot...OK" before you know its done

Congratulations your almost done!!

Simply repeat the same process for the sys.yaffs2.img file, only this time, we go:
click System
click Select file(browse to where you saved the sys.yaffs2.img you downloaded above)
click erase
click flash

once again
YOU MUST wait for the black window below to show "writing sys.yaffs2.img OK" before you know its done.
it should take about 50 seconds, depending on your system specs.

Lastly, unplug the usb cable,
now, while holding "volume-up" plug it back
keep holding volume up till you enter the Android 3e stock recovery menu.
using volume up and down to move
select "wipe cache", PRESS power button to select
when this is finished
select "wipe data/factory reset"

when this is done restart your phone
these last two steps are important..else you may have boot-loop

well..guess thats pretty much it. regarding the memory boost..i will post that momentarily.
feel free to post feedback here
courtesy..lexsolutionz

How to install Android OS on Mini Laptop HP Notebook

How to install Android OS on Mini Laptop HP Notebook

Android on Your Netbook or Desktop
Would you like to try out Google’s Android OS on your netbook or desktop? Here’s how you can run Android from a flash drive and see how fast Android can run on real hardware!
Install Android On Your Flash Drive or Memory Card
First, make sure you have a flash drive or memory card inserted into your computer with around 256MB or more storage space. Remove any files you may need off of the drive, so you can use it to run Android on your computer.
Now you’re ready to download and setup Android on your drive. Head over to the Android x86 download page http://www.android-x86.org/download, scroll down to the StableRelease section, and click View under Android-x86-3.2-RC2.iso. This will start the iso file downloading to your computer.
In the mean time, head over to the UNetbootin site http://unetbootin.sourceforge.net/, and download it as well.
Once your downloads are complete, run UNetbootin. Click the bullet beside Diskimage, then click the “… “ button and select the Android ISO file you just downloaded. Finally, select the correct flash drive or memory card in the menu on the bottom, and click Ok.
UNetbootin will now copy the files to your flash drive. This may take a few moments, depending on your flash drive’s speed.
Once it’s finished, it will ask if you wish to reboot. If you want to go ahead and run Android, you can click Reboot; otherwise, just exit and run Android from your flash drive when you want.
If you want to try Android on a computer that has a CD/DVD drive, you could just burn the ISO to a disk and boot from it. Netbooks don’t have CD drives, and even on a desktop, it can be nice to not waste a CD just for this. If you want to burn it to a disk, you can do it easily from Windows 7 or with a free program such as ImgBurn.
Using Android-x86 On Your Computer
Now you’re ready to run Android on your netbook, laptop, or even a full desktop computer. Simply reboot your computer with the USB drive, and select to boot from it. Not all computers will automatically boot from a USB device, so you may have to press F2, F10, or another key, depending on your computer, and change the Boot options in the bios.
Now, when you boot from the USB drive, select Live CD – Run Android-x86 without installation.
You’ll see a text prompt for a few moments as Android begins to load.
Then you’ll see the Android boot screen, though we only saw it for a moment, as our computer booted really fast into Android.
After a couple seconds, you’ll see the Android desktop … on your netbook or computer! You can quickly access one of the apps on the home screen, or open the menu to see more options.
Thank you so much.